Page 1
CloudGen Firewall F93R Warranty and Safety Instructions Opening your Barracuda Networks appliance or removing its warranty label will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions Power supply is not included in packaging and needs to be ordered separately (BNGF93A.PA009/BNGIF93A.PA009).
Barracuda CloudGen Firewall 1 GbE Optical Fiber SFP The CloudGen Firewall hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your firewall. To protect your network, follow the instructions for the standard deployment. Hardware Specifications...
Page 3
The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda appliance it was delivered with.
Page 4
Barracuda CloudGen Firewall Installation has not initialized far Status LED front side - Off enough for LED control when GREEN/RED installation is started. After a hotfix installation, the LED turns to green until the next Box is running normally, or Status LED front side - reboot in case the hotfix...
Page 5
Barracuda CloudGen Firewall configure the serial port on the terminal using the following parameters: Parameter Value Baud 19200 Bits Stop bit Parity None Handshake None F93R (Rugged) 5 / 6...
Page 6
Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the CloudGen F93R and is the answer not in the manual?
Questions and answers