Advertisement
Quick Links
Barracuda CloudGen Firewall
F900 Revision B
https://campus.barracuda.com/doc/71862292/
F900 Rev. B Model CCC (32x1 GbE RJ45 Ethernet network ports)
F900 Rev. B Model CCE (16x1 GbE RJ45 Ethernet + 8x10 GbE SFP + (glass fiber) network ports)
F900 Rev. B Model CFE (8x1 GbE + 8x1 GbE SFP (glass fiber) + 8x10 GbE SFP+ (glass fiber) network ports)
F900 Rev. B Model CFEQ (8x1 GbE + 8x1 GbE SFP (glass fiber) + 4x10 GbE SFP+ (glass fiber) network ports + 2x40 GbE
QSFP+ (glass fiber) network ports)
Power Supply Unit for all Upper Models
Supported Barracuda Network Module Combinations
M806
M807
M808
M809
F900 Revision B
1 / 7
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Barracuda CloudGen F900 Revision B CCC
Summary of Contents for Barracuda CloudGen F900 Revision B CCC
- Page 1 F900 Rev. B Model CFEQ (8x1 GbE + 8x1 GbE SFP (glass fiber) + 4x10 GbE SFP+ (glass fiber) network ports + 2x40 GbE QSFP+ (glass fiber) network ports) Power Supply Unit for all Upper Models Supported Barracuda Network Module Combinations M806 M807...
-
Page 2: Default Port Configuration
firewall. To protect your network, follow the instructions for the standard deployment. Hardware Specifications Warranty and Safety Instructions Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions... - Page 3 The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks CloudGen Firewall or Control Center...
- Page 4 Barracuda CloudGen Firewall LEDs and Acoustic Signals Your appliance is equipped with a variety of LEDs. One of them is the Status LED. It is labeled either with a heart symbol or the term 'Status'. It indicates the appliance’s operational state by changing colors between green and red and by changing between blinking and steady glowing.
- Page 5 Barracuda CloudGen Firewall PSU modules connected and Power supply unit is up and Steady running running. PSU LEDs - GREEN Power defective, standby, or Power supply unit is off or in Off shutdown standby mode. Acoustic Signal Frequency Meaning Installation...
-
Page 6: Rack Mounting
Once set, this flag can not be deleted through the menu. When Menu to boot into during rebooted, the appliance will not start Barracuda OS, but ART the next reboot instead. You may connect to the appliance by using the serial console or by SSH. - Page 7 Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the CloudGen F900 Revision B CCC and is the answer not in the manual?
Questions and answers