Models And Options - ITech IT-M3400 Series User Manual

External
Meter
SDS
Config
System
Reset
System
Info
Instr Alias

1.8 Models and Options

This series models include:
observe the total historical regenerative power and capacity information.
UUT Temp DUT temperature
Re-Energy The regenerative power
capacity of charge and discharge, when the battery simulator
AHour function or battery test function is enabled, the capacity data
will be cleared.
energy data, when the battery simulator function or battery
WHour
test function is enabled, the energy data will be cleared.
Reset
clearing the energy data and capacity data.
Meas
clearing the regenerative power data.
Reset ReE
Anti-reverse connection module configuration
None No SDS Module detected
Enable Enable the SDS function
Disable Disable the SDS function
Select whether to restore the factory default settings or not.
View the system information.
Model
Ver
CommVer
SN
Last Cal
Start Time
The alias of the instrument, which can be modified by the user to note
information
Voltage(V)
Model
IT-M3412
IT-M3422
Copyright © Itech Electronic Co., Ltd.
Display the instrument model.
Display the control board version.
Display the communication board version.
Display the serial number.
Display last calibration date.
Display the instrument running time.
Current(A)
30
60V
30
Quick Reference
Power(W)
200
400
12