Tripp Lite SMART1524ET Owner's Manual page 25

Operation
Second CONTROL Screen (1 item)
• EVENT/TM RESET: Selecting the EVENT/TM RESET option resets all EVENTS and
TIME DURATIONS stored in the UPS. To reset all events and times, navigate to
the RESET EVENT/TM screen and select YES or NO from the sub-menu options.
Select YES to reset all Events and Time Durations
Select NO to keep all stored Events and Time Durations
5. HELP: The HELP menu item displays UPS MODEL NUMBER information. To display
the UPS model number, navigate to the HELP screen and press the Enter button.
Then press the Esc button to return to previous menu.
6. COMMUNICATIONS
Your UPS can be configured, managed and monitored via one of the available
communication ports listed below. Choose the connection type most suitable for
your application environment.
• ACCESSORY CARD SLOT: This optional slot can be used with Tripp Lite's
WEBCARDLXMINI accessory card and a limit of one optional "E2" environmental
sensor for remote management and monitoring via secure web browser or
SNMP protocols. See the documentation provided with the accessory card for
installation and set-up configuration information.
Attention! When the optional slot is in use, the RS-232/USB
communications ports are disabled.
• RS-232 / USB CONSOLE: The front-panel RS-232 and USB monitoring ports
enable local monitoring of UPS status, viewing event logs, setting parameters
and controlling the UPS using a terminal emulation program, such as Windows
HyperTerminal. To use this feature, connect a computer to either the RS-232 or
USB port and open your terminal emulation program. Setup and operation using
Windows HyperTerminal is included here and will vary by the VT-100 terminal
emulation program used.
25