Tripp Lite SMART1524ET Owner's Manual page 51

Internal Fan Replacement
4
Remove screws that
secure the fan to the fan
panel.
5
Install the replacement
fan and secure it to the
fan panel. Make sure
to pay attention to its
original orientation.
6 Attach the fan cable
to the main board fan
connector.
7
Reattach the fan panel
back to the UPS.
8 Check operation of fan
by powering ON the UPS
system.
9 Secure fan panel back to
the UPS with the screws
removed in step 1.
4
7
9
51
Remove the 4 screws
Insert the 2 screws