Download Print this page
Tripp Lite SMART1200LCD Owner's Manual
Tripp Lite SMART1200LCD Owner's Manual

Tripp Lite SMART1200LCD Owner's Manual

Ups system
Hide thumbs Also See for SMART1200LCD:

Advertisement

Available languages

Available languages

Quick Links

SMART1200LCD and SMART1500LCD
English
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your
warranty.
UPS Location Warnings
• The UPS is designed for indoor use only in a controlled environment, away from excess moisture, heat/cold, conductive contaminants, dust or
direct sunlight.
• Leave adequate space around all sides of the UPS for proper ventilation.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the unit's internal cool-
ing, eventually causing product damage not covered under warranty.
UPS Connection Warnings
• Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.
• Do not modify the UPS's plug, and do not use an adapter that would eliminate the UPS's ground connection.
• Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used
to connect your UPS to an outlet.
• If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.
• The UPS contains its own energy source (battery). The output terminals may be live even when the UPS is not connected to an AC supply.
Equipment Connection Warnings
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic
mixture with air, oxygen or nitrous oxide.
• Do not connect surge suppressors or extension cords to the output of your UPS. This might damage the UPS and will void the surge suppressor and UPS
warranties.
Battery Warnings
• Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user-serviceable parts inside.
• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a
fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing bat-
tery replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery replacement should be performed only by
authorized service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for
disposal requirements or in the USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for recycling informa-
tion. Tripp Lite offers a complete line of replacement batteries at www.tripplite.com.
• Do not attempt to add an external battery pack to the UPS.
Copyright © 2007 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
Owner's Manual
Not suitable for mobile applications.
1
Español
1111 W. 35th Street • Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
5
Français
9

Advertisement

loading
Need help?

Need help?

Do you have a question about the SMART1200LCD and is the answer not in the manual?

Questions and answers

Summary of Contents for Tripp Lite SMART1200LCD

  • Page 1 Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty. UPS Location Warnings •...
  • Page 2 • If the “REPLACE” icon remains lit and the alarm continues to sound after the test, the UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the icon continues to illuminate after repeated self tests, contact Tripp Lite for service. Battery replacement should only be performed by qualified service personnel.
  • Page 3 These ports can connect your UPS to any computer for automatic file saves and unattended shut- down in the event of a power failure. Use with Tripp Lite's PowerAlert Software (available as a FREE download at www.tripplite.com) and appropriate USB or DB9 cable. A USB or DB9 cable may be included with your UPS. If the appropriate cable did not come with your UPS, any user-supplied DB9 pass-through or USB cable may then be used to connect your UPS to your computer.
  • Page 4 2. If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the prob- lem over the phone.
  • Page 5: Manual Del Propietario

    Instrucciones de seguridad importantes GUARDE ESTAS INSTRUCCIONES Este manual contiene instrucciones y advertencias que deben seguirse durante la instalación, operación y almacenamiento de todos los UPS de Tripp Lite. El incumplimiento de estas advertencias anu- lará su garantía. Advertencias sobre la ubicación del UPS •...
  • Page 6 Permita que el UPS se recargue continuamente por 24 horas y repita la autoprueba. Si el icono continúailuminado después de varias auto-pruebas, solicite servicio a Tripp Lite. El reemplazo de baterías debe ser realizado solamente por personal de servicio calificado. Si el UPS requiere un reemplazo de batería,...
  • Page 7 UPS necesita ser recargada o reemplazada. Permita que el UPS se recargue continuamente por 24 horas y repita la auto-prueba. Si el icono sigue iluminado, contacte con Tripp Lite para que le brinden servicio. El reemplazo de baterías debe ser realizado solamente por personal de servicio calificado.
  • Page 8: Almacenamiento Y Servicio

    2. TRIPP LITE, se compromete a reparar, y en caso de que a su juicio no sea posible la reparación, a cambiar el equipo, así como las piezas y componentes defectuosos del mismo sin cargo alguno para el propietario durante el periodo de garantía, así...
  • Page 9: Manuel Du Propriétaire

    Consignes de sécurité importantes CONSERVEZ CES INSTRUCTIONS Ce manuel contient des instructions et avertissements qui doivent être suivis pendant l'installation, l'opération et l'entreposage de tous les systèmes Tripp Lite UPS. Ne pas vous conformer à ces avertissements annulera votre garantie.
  • Page 10 être rechargées ou remplacées. Laissez le UPS se recharger en continu pendant 12 heures et répétez l'auto-test. Si le témoin lumineux reste allumé après de nombreux auto-tests, contactez Tripp Lite pour obtenir du service.. Le remplacement des piles doit être effectué uniquement par un personnel de service qualifié. Si...
  • Page 11 Laissez le UPS se recharger en continu pendant 12 heures et répétez l'autotest. Si le témoin lumineux demeure allumé, contactez Tripp Lite pour obtenir du service. Le remplacement des piles doit être effectué uniquement par un personnel de service qualifié. Si le UPS requiert le remplace- ment de ses piles, Tripp Lite offre une gamme complete de piles de remplacement à...
  • Page 12: Entretien

    UPS à s'être produit durant l'expédition à Tripp Lite ou à un centre autorisé de Tripp Lite n'est pas couvert par la garantie. Les systèmes UPS expédiés à Tripp Lite ou à un centre de service autorisé Tripp Lite doivent être envoyés tout frais de transport pré-payés. Inscrivez le no. RMA à l'extérieur du paquet. Si le sys- tème UPS est encore dans sa période de garantie de 2 ans, incluez une copie de votre reçu d'achat.

This manual is also suitable for:

Smart1500lcd