Angelo Po 1G0TP0 Use And Installation Manual page 24

RECOMMENDATIONS FOR ADJUSTMENTS
Important
Before making any type of adjustment, acti-
vate all the safety devices provided and de-
cide whether staff at work and those in the
vicinity should be informed.
ADJUSTING GAS CONTROL VALVE MINIMUM SETTING (PLATE)
Important
This adjustment is only required if the type
of gas to be connected is different from that
used for testing after the conversion proce-
dure has been carried out (see page 22). Be-
Natural gas
(A)
(B)
(C)
(D)
(E)
(D)
In particular, turn off the gas supply tap and
prevent access to all devices which might
cause unexpected health and safety haz-
ards if turned on.
fore making this adjustment, check that the
gas supply pressure is the same as the rat-
ed pressure for the type of gas in use
(see table at back of manual).
A
(F)
Liquid gas
(F)
E
C
B
(A)
(A)
(B)
(C)
(C)
D
F
(C)
(F)
(A)
English