quadient iMeter IS-280 Replacement Part Manual page 4

3. The screen will display
"This process helps you to
install a new PSD."
Press "Next".
4. Ensure the LAN or phone
modem is connected to the
base and the cable from
the LAN adapter or analog
modem is connected to the
LAN or analog phone
outlet.
Press "OK".
5. A connection to the online
server must be performed
to complete the PSD swap
process.
Press "Next".
6. The machine is preparing
for the call.
Do not interrupt this
process.
7. The machine is connecting
to the online server.
Do not interrupt this
process.
© 2011 Neopost USA Inc. All rights reserved. No part of this document may be reproduced or distributed in any form or by any means.
If you fail to return the old PSD within ten business days,
you will be charged the full replacement value of the PSD.
For questions, please call: l-800-NEOPOST (1-800-636-7678).
8. The PSD swap transaction
is in progress.
Do not interrupt this
process.
9. The PSD swap transaction
was successful.
Press "OK".
10. The PSD replacement
process has now been
completed.
Press "OK".
11. A warning message will be
displayed. The new PSD
should be installed and will
be initialized after the first
postal imprint.
12. Press the Sleep/Wake
button. Before processing
mail, disconnect the power
cable from the wall outlet,
Wait 10 seconds then
connect the power cable to
the wall outlet.