Dash DFM250 Instruction Manual page 11

Using YOUR Deluxe Fondue Maker
4
Preheat if necessary (follow directions in recipe being used).
Add ingredients to be melted.
5
Turn the Temperature Dial to desired temperature level, using
instructions in section Cooking Chart. Indicator Light will go
off when the selected temperature is reached. During cooking,
the Indicator Light will cycle on and off to indicate that the
temperature is being maintained.
Place Fork Holder on the rim of the Fondue Pot, be careful
6
to avoid hot steam. Use the Fondue Forks to spear foods for
cooking and dipping. Be careful not to scratch the nonstick
surface when placing Forks in the Fondue Pot.
NOTE:
When ingredients are stirred in the Fondue Pot, use
plastic, nylon or wooden utensils to prevent damage to the
non-stick surface.
Add the Fondue Cups to the Serving Ring for serving.
7
After cooking or serving, turn Temperature Dial to "MIN" and
unplug the Magnetic Power Cord from the wall outlet. Allow Fork
Holder to cool completely before removing.
CAUTION: The Magnetic Power Cord is not to be removed during
normal operation. If the plug becomes disconnected, you should
immediately unplug the cord set from the wall outlet.
∙ 11 ∙