Advertisement
EN
STEP 2
STEP 2.1
Screw the bars into the main plinth with the
side B facing downwards and going into the
plinth. Side A, where the O-rings are located,
faces upwards.
STEP 2.2
On the bottom side of the main plinth, the
bars should protrude for 15mm.
STEP 2.3
Tighten the nuts on the bars using the 13mm
wrench to lock them in place as they will
support the upper plinth.
8
Advertisement
Need help?
Do you have a question about the Bellagio Reference and is the answer not in the manual?
Questions and answers