GOLD NOTE® Bellavista Signature I T A L I A N P R E S T I G E R I G I D T U R N T A B L E I T A L I A N P R E S T I G E R I G I D T U R N T A B L E Owner’s Manual...
1/100 of a millimeter, enabling world class sound quality. The two piece Spindle clamps the platter tight, completely eliminating all unwanted vibrations and oscillations. The Bellavista Signature can be equipped with any Gold Note or other 9″ arm on demand. All Gold Note...
Construction features The BELLAVISTA is rigid turntable that, like all the turntables of the Gold Note line, uses a plinth made in black high-density polished acrylic obtained via “polymeric melting The black plinth has 3 aluminium height-adjustable feet with a semi-conical shape featuring central grooves to ensure greater insensitivity to vibrations.
Remove the turntable and parts from the box and check all the parts of the co9ntent list is available. Place the Bellavista Signature deck on a level surface you have chosen for it. We recommend a wall shelf, as they are the most sturdy, and immune to footfall, but a well made equipment rack should give satisfactory results also.
Page 5
33 1/3 rpm or 45 rpm By positioning the belt in the smaller groove of the synchronous pulley motor, the BELLAVISTA SIGNATURE turntable be set at 33 1/3 rpm, while in the larger groove it will be set at 45 rpm. This positioning must be carried out manually.
Page 6
Italian Prestige Rigid Turntable (Warranty Registration) (Warranty Registration) To validate the warranty is necessary to register the unit on the Gold Note internet web site within 15 days from the purchase on the appropriate area of the web site: http://www.goldnote.it/ If the unit is not registered correctly or is been purchased from a different country of the purchaser origin/home the unit will not be covered by any warranty and the eventual registration refused.
Page 7
Do not return any object directly to the factory or to the national distributor or without being authorized to do so. In such cases both GOLD NOTE® and the distribution agents operating within your territory decline responsibility of any kind.
Page 8
The Records hardly fit SPINDLE (of the Platter): • Gold Note Platter Spindle Tips have • Sorry you need to enforce the TIP OF THE DIAMETER into the Platter Spindle a 7,2mm of diameter that is the...
Page 9
Check the right speed with a proper stroboscope VTA ADJUSTMENT VTA tone arm is not adjustable • • The 3 arm board collar hex bolts are screwed into the collar too much and do not let the arm shaft gets in it;...
Need help?
Do you have a question about the Bellavista Signature and is the answer not in the manual?
Questions and answers