Removing Drawers; Removing Slides; Cleaning; Interior Cleaning - Follett FZR20-LB Installation, Operation And Service Manual

Removing drawers

1. Pull drawer forward to stop (Fig. 51.1).
2. Lift drawer front to free front rollers from slides (Fig. 51.2).
3. Still lifted, pull drawer forward to free back rollers from slides.

Removing slides

1. Push slides all the way back.
2. Swing bottom of slide away from freezer wall and lift slide off rollers.

Cleaning

Use non chlorine-based cleaners. Cleaners containing chlorine can cause
staining and pitting of the stainless steel.
Disconnect power to unit by turning the power switch off, located on the
upper front facade panel, and removing the power cord from the receptacle.

Interior cleaning

Using a sponge or soft cloth, clean unit with a non-abrasive, non-
chlorinated, all-purpose detergent. Note: The left and right air plenums
should be removed to clean them, as well as behind them (Fig. 52, 53). In
addition the shelves, drawers and slides should be cleaned as well. Allow
unit to dry thoroughly prior to turning on.

Exterior cleaning

Wipe stainless steel exterior with a soft cloth in the direction of grain as
needed. Stainless steel polish may be used to enhance the finish of the
unit. The glass door and exterior parts may be cleaned with a soft cloth,
window cleaner or other non-abrasive cleaner.
00981795R03 – FZR20/25 LB, PL
Fig. 51
1
Fig. 52
Fig. 53
Cleaning
2
21