Brother HL-2460 Series User Manual page 93

♦
Reprint the last JOB 3 times
☛ 1.
Set the REPRINT function ON with SETUP mode using the control panel.
✒ Notes
If you print using the driver supplied with the printer, the settings for Job
Spooling in the printer driver will take priority over the settings made on the
Control panel. For more information,
☛ 2.
Press the
---REPRINT---
COPIES=
---REPRINT---
COPIES=
PRINTING
---REPRINT---
COPIES=
✒ Notes
•
If you press the
•
If you want to reprint the data and have pressed the
display shows "PRESS SET TO PRINT". Press the
reprinting, or press
Reprint switch.
↓
↓
If you wait too long to continue the switch panel operation, the
1
display exits the REPRINT menu automatically.
↓
+
Press twice.
↓
3
↓
Set Reprint.
Press or
↓
↓
↓
1
Go switch, the printer will exit from the reprint menu.
Go to cancel the reprint job.
see "Job Spooling" in Chapter 2.
3–8
Go switch, the
switch to start
Set