Brother HL-2460 Series User Manual page 35

We recommend the following print methods (output tray) for each media
type:
Jump to the page for each printing method by clicking the check mark in the
following table.
Media type
Plain paper
Recycled paper
Bond paper
Thick paper
Thicker paper
Transparency
Label
Envelope
Card stock
You can select the priority of the paper source in the PAPER mode by using
the control panel.
For more information about the setting, see Chapter 3.
✒ Note
•
If you print on thick paper that weighs more than 150 g/m
face up printing.
•
We recommend that you use face up printing when you print on
transparencies.
•
If a paper jam occurs when using A6 size paper, remove the jammed
paper, turn over the stack of the paper in the paper cassette, and print it
again.
•
If the paper is misfeeding or multi pages frequently feed at once when
you print on small size paper or thick paper, change the paper thickness
switch in the paper cassette.
Face down
✔
✔
✔
✔
✔
✔
To remove the jammed paper, see Chapter 6.
1-15
Face up
✔
✔
✔
✔
✔
✔
✔
✔
✔
For more information, see page 1-21.
CHAPTER 1 ABOUT THIS PRINTER
Notes
2 2
60 g/m to 105 g/m
(16 to 28 lbs.)
2
105 g/m to 150 g/m
(28 to 40 lbs.)
2
150 g/m to 200 g/m
(40 to 53 lbs.)
OHP film
(40 lbs.), use
2
2
2