Brother HL-2460 Series User Manual page 91

When you use RAM to reprint:
☛ 1.
Press the
select RAMDISK SIZE in the SETUP mode.
☛ 2.
The default RAM is 0MB. Press the
size in increments of 1MB.
✒ Notes
When you increase the RAM size for secure printing, the work area of the
printer is decreased and the printer performance will be reduced. Ensure
that you reset the RAMSIZE to 0MB when you have finished using secure
printing.
When you store the data in RAM, the data will be deleted when the printer
power is turned off.
We also recommend adding additional RAM if you want to be able to print a
large amount of secure data.
switch on the control panel to exit from the READY status and
Set

switch to increase the reprint RAM
(See "RAM Expansion" in Chapter
3–6
4)