Brother HL-2460 Series User Manual page 147

☛ ☛ ☛ ☛ 6.
Press the DIMM straight into the slot (press firmly). Make sure the locks on
each side of the DIMM snap inward into place. (To remove a DIMM, the
locks must be released.)
☛ ☛ ☛ ☛ 7.
Secure the metal plate with the three screws in the order shown.
☛ ☛ ☛ ☛ 8.
Install the side cover.
☛ ☛ ☛ ☛ 9.
Reconnect the interface cable from your computer.
Plug the power cord into the AC outlet, and then turn on the printer.
☛ ☛ ☛ ☛ 10.
To check whether the DIMM has been installed correctly, you can print a
Test page "Print Configuration" that will print the current memory size.
print a "Configuration page," see Chapter 3.
Fig. 4-13
z z z z
Fig. 4-14
4–15
y y y y
x x x x
CHAPTER 4 OPTIONS
To