☛ 4.
Place the envelopes in the multi-purpose tray so they touch the back of the
tray and remain below the limit M mark.
✒ Note
Make sure that the neatly stacked paper is correctly seated on the multi-
purpose tray, otherwise paper may not be fed correctly, resulting in a skewed
printout or a paper jam
☛ 5.
Press and slide the paper width adjuster to fit the envelope size.
✒ Note
When you place paper on the multi-purpose tray, note the following:
•
The print surface must be face up.
•
The leading edge must be placed inside first so it rests lightly against
the printer.
•
The top of the paper stack must be under the guides that are on both
sides of the tray.
Up to M mark.
Fig. 1-19
Fig. 1-20
1-30