Brother HL-2460 Series User Manual page 144

R A M E x
R A M E x
The HL-2460 printer has 16 Megabytes of standard memory and 2 slots for
optional expansion memory. The memory can be expanded up to 272
Megabytes by installing commercially available dual in-line memory modules
(DIMMs). (The standard memory fitted can vary depending on the printer
model and country.)
The HL-2460N printer has 32 Megabytes of standard memory. The memory
can be expanded up to 272 Megabytes. When you want to upgrade to more
than 160 Mbytes, you will need to remove the already installed 16 Mbytes
DIMM and replace it with a higher capacity DIMM. (The standard memory
fitted can vary depending on the printer model and country.)
The following capacity of DIMM can be installed:
<US>
• 16 Megabytes
• 32 Megabytes
• 64 Megabytes
• 128 Megabytes
<Europe>
• 16 Megabytes
• 32 Megabytes
• 64 Megabytes
• 128 Megabytes
In general, the DIMM must have the following specifications:
Type:
CAS Lantency:
Clock Frequency:
Capacity:
Height:
Parity:
Dram Type:
SDRAM can be used.
Note
For more information, consult the dealer where you purchased the
printer.
For the latest information, visit the Brother Solutions Center at
http://solutions.brother.com
p a n s i o n
p a n s i o n
TECHWORKS
TECHWORKS
TECHWORKS
TECHWORKS
BUFFALO TECHNOLOGY
BUFFALO TECHNOLOGY
BUFFALO TECHNOLOGY
BUFFALO TECHNOLOGY
100 pin and 32 bit output
2 or 3
66MHz or more
16, 32, 64 Megabyte or 128 Megabyte
46mm (1.8 inches) or less
NONE
SDRAM 4 Bank
4–12
12456-0001
12457-0001
12458-0001
12459-0001
12323-0001
12324-0001
12325-0001
12326-0001