Brother HL-2460 Series User Manual page 59

M a n u a l F e
M a n u a l F e
If you place paper in the multi-purpose tray when the setting MANUAL FEED
= ON has been set in PAPER mode using the control panel, the printer will
load paper only from the multi-purpose tray.
✒ ✒ ✒ ✒ Note
When you feed paper manually, note the following:
•
If your application software supports a manual feed selection in the print
menu, you can select it through the software. Since the software or
command setting overrides the switch setting, you do not need to set the
MANUAL FEED mode and the paper size in PAPER mode.
•
If you use pre-printed paper in the multi-purpose tray, the paper should
be inserted top edge first with the pre-printed side face up.
e d
e d
1-39
CHAPTER 1 ABOUT THIS PRINTER