Brother HL-2460 Series User Manual page 173

Paper may jam in the paper cassette, inside the printer, in the face up output
tray or at the paper exit. Check the jam location and follow the instructions
below to remove the jammed paper.
If the error message still appears on the LCD after you remove the jammed
paper, there may be an additional paper jammed in another position. Please
check all positions.
After all jammed paper has been removed, open the top cover, and then
close the top cover again to start printing.
✒ ✒ ✒ ✒ Note
If the paper is misfeeding or multiple pages frequently feed at once when
you print on small-sized or thick paper, we recommend that you change the
adjustment levers in the paper cassette as follows:
The switches in this illustration are shown in the default setting position.
A6
A4 100 g/m
Letter 105 g/m
Legal 105 g/m
Executive, A5, B6
Do not use the following paper:
• Bent paper
• Moist paper
• Paper that does not meet specifications
Switch 1: OFF
Switch 2: OFF
2
(27 lbs) Switch 1: ON
2
(28 lbs) Switch 2: ON
2
(28 lbs)
Switch 1: OFF
Switch 2: ON
6–8