Brother HL-2460 Series User Manual page 3

T o U s e t h
T o U s e t h
Warning
•
There are high voltage electrodes inside the printer. Before
replacing internal parts, cleaning the printer or clearing a
paper jam, make sure you have turned off the power
switch and unplugged the power cord from the power
outlet.
•
Do not handle the plug with wet hands. Doing this might
cause an electrical shock.
High Temperature
After you have just used the printer, some internal parts of
the printer are extremely hot. When you open the front
cover or rear cover of the printer, never touch the shaded
parts shown in the following illustration.
•
To prevent injuries, at least two people should lift the printer – making sure they hold the printer as shown in the
illustration below.
•
Do not stand the printer and optional.
e P r i n t e r
e P r i n t e r
S a f e l y
S a f e l y
Fuser is HOT!
Inside the printer
•
Be careful not to trip on the legs of the optional
Stabilizer unit.
ii
Open the face up output tray