Filling The Racks - Bosch REXROTH mMS 4.0 Operating Manual

Training system mMS 4.0 | R901429162/04.16

Filling the racks

To load the separating racks with workpieces proceed as follows:
Load aluminum cube half 50 x 50 x 25 mm into the right-hand rack from

above, while open.
Load the workpiece using two fingers and guide it as you move it down.

Load black plastic cube half 50 x 50 x 25 mm into the left-hand rack

downward, while open.
Fig. 4: Sliding in workpieces
Bosch Rexroth AG 29/68
About this product