Training system mMS 4.0 | R901429162/04.16
Trained personnel
Improper use of the product is defined as in particular
Failing to the mMS 4.0 training system seriously in an appropriate manner
during the exercises and outside of lesson time,
Using the parts in a different training system,
Connecting or using other devices or device sets than that authorized
for the mMS 4.0 training system,
Combining or modifying pneumatic pressure circuits.
Supplying the system without supplementary disturbance suppression
measures (filters, throttles, etc) from non-industrial supply networks.
2.4
Staff qualification
2.4.1
Firms offering apprenticeships
Students and apprentices may only work on the mmS 4.0 training system:
Under direct supervision,
after being given appropriate instructions
by a instructor or trained member of staff.
Instructor
The instructor working with the mMS 4.0 training system must be a trained
specialist familiar with the electrical pneumatic and mechanical device and
the mechatronics field.
The instructor must
give clear instructions when students or participants in the training program
are required to install control circuits in the mMS 4.0 training system,
inspect the installation and functional effects of the control circuit ensuring
safe use before switch on,
answers questions in a clear, understandable way.
Trained members of staff may also be used to supervise the mMS 4.0 training
system during the exercises.
These are qualified persons to be trained and instructed about:
the information given,
possible dangers in the event of improper use,
safeguards and safety measures.
Bosch Rexroth AG
9/68
Safety instructions