General Safety Instructions - Bosch REXROTH mMS 4.0 Operating Manual

Training system mMS 4.0 | R901429162/04.16
2.5

General safety instructions

 Follow the valid regulations on accident prevention and environmental
protection.
 Observe the safety regulations and provisions of the country in which
the product is used.
 Only use Rexroth products when they are in a technically faultless condition.
 Observe all information about the product.
 Persons permitted to assemble, operate, disassemble or maintain Rexroth
products must not be under the influence of alcohol, other drugs or medication
which can impair responsiveness when doing so.
 Only use accessories or spare parts approved by the manufacturer to prevent
hazards to persons owing to unsuitable spare parts.
 Adhere to the technical data and environmental conditions given in the product
documentation.
 If unsuitable products are installed or used in safety-relevant applications,
unintended operating states may arise in the application which could cause
personal injury and/or property damage. Therefore, only use the product in
safety-relevant applications if such a use is specified and allowed in the product
documentation.
 You may only put the product into operation after it has been established that
the end product (e.g. a machine or installation) in which the Rexroth products
are fitted, meet the country-specific regulations, safety regulations and
standards for the application.
 The product must not be put into operation unless this operating manual has
been read and understood.
Bosch Rexroth AG 11/68
Safety instructions