Transport, Set-Up, Installation And Commissioning; Troubleshooting, Maintenance And Repair - Bosch REXROTH mMS 4.0 Operating Manual

10/68 Bosch Rexroth AG
Safety instructions
2.4.2

Transport, set-up, installation and commissioning

Work on the mMS 4.0 training system such as set-up, connection,
commissioning, and repair must only be performed by experts or persons with
sufficient qualifications and authorization who have been instructed to do so.
Persons instructed to work on the mMS 4.0 training system must be able to follow
the information in this documentation, and also, in the event of missing
information, and supplement missing information independently on account
of their professional qualifications.
2.4.3

Troubleshooting, maintenance and repair

Maintenance, repair, troubleshooting and fault removal require particular
knowledge. This work may only be performed by trained skilled workers!
 Work on the electrical equipment must only be performed by a qualified
felectrician.
A qualified electrician is someone who can recognize possible hazards and
implement the appropriate safety measures due to their professional training,
knowledge, and experience, as well as their understanding of the relevant
conditions pertaining to the work to be done.
 Only skilled personnel with special expertise and experience in pneumatic
components are allowed to work on the pneumatic system. Special knowledge
of pneumatics means that personnel must
be able to read and understand pneumatic plans completely,
–
in particular, fully understands the interdependencies of the installed safety
–
installations and
are familiar with the function and arrangement of pneumatic components.
–
 Only skilled personnel with special expertise in and experience of hydraulic
components are allowed to work in the hydraulics system. Specialist knowledge
of hydraulics means that the employee must
be able to read and understand hydraulic plans completely,
–
in particular, fully understands the interdependencies of the installed safety
–
installations and
be familiar with the function and arrangement of hydraulic components.
–
Training system mMS 4.0 | R901429162/04.16