General; Principles; Installation Of Partly Completed Machinery; Target Group - KSB Etanorm FXV Installation & Operating Manual

1 If agreed to be included in the scope of supply
6 of 62

1 General

1 General

1.1 Principles

This operating manual is valid for the type series and variants indicated on the front
cover.
The operating manual describes the proper and safe use of this equipment in all
phases of operation.
The name plate indicates the type series and size, the main operating data, the order
number and the order item number. The order number and order item number
clearly identify the pump set and serve as identification for all further business
processes.
In the event of damage, immediately contact your nearest KSB service facility to
maintain the right to claim under warranty.

1.2 Installation of partly completed machinery

To install partly completed machinery supplied by KSB refer to the sub-sections under
Servicing/Maintenance.

1.3 Target group

This operating manual is aimed at the target group of trained and qualified specialist
technical personnel. (ð Section 2.3, Page 8)

1.4 Other applicable documents

Table 1: Overview of other applicable documents
Document
Data sheet
General arrangement drawing/
outline drawing
Drawing of auxiliary connections Description of auxiliary connections
Hydraulic characteristic curve
General assembly drawing
Sub-supplier product literature
1)
Spare parts lists
1)
Piping layout
1)
List of components
1)
Assembly drawing
For accessories and/or integrated machinery components observe the relevant
manufacturer's product literature.

1.5 Symbols

Table 2: Symbols used in this manual
Symbol Description
✓ Conditions which need to be fulfilled before proceeding with the
step-by-step instructions
⊳ Safety instructions
⇨ Result of an action
Cross-references
⇨
Etanorm FXV
Contents
Description of the technical data of the pump (set)
Description of mating and installation dimensions
for the pump (set), weights
Characteristic curves showing head, NPSH
required, efficiency and power input
1)
Sectional drawing of the pump
1)
Operating manuals and other product literature
describing accessories and integrated machinery
components
Description of spare parts
Description of auxiliary piping
Description of all pump components
Sectional drawing of the installed shaft seal