Handling - Mitsubishi Electric V Series Instruction Manual

7. Handling

Never drop the circuit breaker when handling. Never roll the circuit breaker when handling.
CAUTION
Do not drop the circuit breaker.
■ Fixed type
When moving the fixed type, use the bundled lifting
hooks (HP).
(Note)
Attach the lifting hooks (HP) to the hollow of
the circuit breaker surely as shown below.
1
2
3
1 m min.
CAUTION
Do not throw the circuit breaker.
■ Drawout type
When moving the drawout type, use the wires hang on
the lifting hole. Before lifting the circuit breaker, take
out the drawout handle and check that the drawout
position is CONNECT position.
Lifting hooks (HP)
Weight
Type AED630-CV to AED1600-CV
3-pole
Fixed type
4-pole
3-pole
Drawout type
4-pole
(Note)
a. The values in the table are typical values, not guaranteed
values.
b. The values include the weight of packaging materials.
The values do not include the weight of optional acces-
sories.
1
CAUTION
A risk of falling.
2
1 m min.
(kg)
37
43
57
66
CONNECT position
DISCONNECT
TEST
CONNECT
E-17