Fixed Type; Drawout Type - Mitsubishi Electric V Series Instruction Manual

6.1 Fixed type

Remove the four fixing bolts as shown.
(Note)
Lifting hooks are bundled. Regarding
how to use the hooks, refer to section 7.

6.2 Drawout type

6.2.1 Drawout device position
■ DISCONNECT position
Projection
E-10
Projection
DISCONNECT
TEST
CONNECT
■ TEST position
DISCONNECT
TEST
CONNECT
The lock plate protrudes and the circuit breaker
is locked. The lock plate does not protrude at
the DISCONNECT position.
(Note)
When the drawout position changes from TEST
to DISCONNECT, the lock plate may protrude.
This is not a malfunction.
■ CONNECT position
Projection
DISCONNECT
TEST
CONNECT