Mitsubishi Electric V Series Instruction Manual page 13

6.1 After drawing out the circuit breaker to the
DISCONNECT position, remove the dra-
wout handle.
6.2 Draw out the left and right side of the circuit
breaker simultaneously from the cradle.
CAUTION
Be careful not to injure your hands
and fingers by the items in the
panel when drawing out the circuit
breaker.
7. After drawing out the circuit breaker, lift up
the circuit breaker by using a lifting truck and
lifting hooks (HP) to remove it from the cradle.
(Note)
For the drawout type, lifting hooks (HP) are
sold separately.
CAUTION
Before removing the circuit breaker, check
that the cradle is fixed.
8. After removing the circuit breaker, remove
the nuts in the cradle.
6
7
Lifting hooks (HP)
8
2
1
Wire
E-13