3.3
Top Cover
(1)
Open the top cover.
(2)
Press the hinges at the left and right sides of the top cover inwards to release the
top cover from the main cover.
Note:
It is recommended for easy removal to press the side of the top cover (
the side of the main cover (
Main Cover
3.4
Rear Cover
(1)
Remove the two M4x12 tapping screws.
(2)
Remove the rear cover.
Taptite, bind M4x12
Rear Cover
Main Cover
Note:
When re-assembling the rear cover, hook the two hooks at the right and left hand side
(rear), then secure the two screws.
).
Main Cover
Fig. 3-3
Fig. 3-4
III-4
) while pulling
Top Cover
2
Top Cover
1
Multi-purpose Sheet Feeder
Taptite, bind M4x12