Brother HL-1020 Service Manual page 235

CHAPTER 2 PAPER HANDLING
3. Move the paper guide to the paper width. ( )
!
Caution
Failure to set the paper guide to the paper size may cause paper skew or
jams.
4. Close the multi-purpose sheet feeder. ( )
Fig. 2-5 Moving the Paper Guide
and Closing the Feeder
Note
If the multi-purpose sheet feeder runs out of paper when you try to print,
the Alarm and Paper lamps blink to alert you to a paper empty error.
You have to load paper in the feeder and push the panel switch to cancel
the alarm and continue printing. If paper jams in the printer, the Alarm
and Paper lamps also blink. If the error is a paper jam, clear it referring
to "PAPER JAMS" in Chapter 6.
2-7