Table of Contents
Advertisement
Figure 9-9. BIOS, Enabling CPU2 Example
6. Press [F4] to save the configuration and reboot the system and press [DEL] to enter
BIOS.
Note: Disabling the VMD controller without first deleting the associated existing RAID
volume can lead to unexpected behavior. This action is strongly not recommended.
Note: The effects of physically changing or swapping a CPU on the VMD controller
enablement has not yet been thoroughly tested or documented.
7. Switch to Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
8. Set Name.
9. Set RAID Level.
Chapter 9: Optional Components
88
Advertisement
Table of Contents
Troubleshooting
