Supermicro SuperBlade SBS-820H-420P User Manual page 30

3. Locate the lever on the carrier and, if necessary, press it down as shown below.
4. Align the CPU keys on the processor (A & B) with those on the carrier (a & b) as shown
below.
CPU Key (on
the carrier)
5. Carefully place one end of the processor under latch 1 on the carrier, and then press the
other end down until it snaps into latch 2 and is properly seated on the carrier.
Processor Carrier Assembly
(Top View)
B
CPU Key (on the
processor)
b
A
2
a
Latch
30
Chapter 3: Installation and Setup
Lever
Latch
1
CPU Key (on the
processor)
CPU Key (on the
carrier)
Processor Carrier Assembly
(Underside view)