Supermicro SuperBlade SBS-820H-420P User Manual page 33

2. Locate four threaded fasteners (a, b, c, d) on the CPU socket.
d
(a, b, c, d: Threaded Fasteners)
3. Locate four PEEK nuts (A, B, C, D) and four rotating wires (1, 2, 3, 4) on the heatsink
as shown below.
A, B, C, D: Peek Nut
1, 2, 3, 4: Rotating Wire
a, b, c, d: Threaded Fastener
Rotating Wire
Peek Nut
(Unlatched)
4. Check that the rotating wires (1, 2, 3, 4) are in the unlatched position as shown.
Unlatched State
Peek Nut
b
CPU Socket
c
a
Rotating Wire2
D
4
Rotating Wire
(latched)
CPU Socket
Rotating Wire
Side View
33
Chapter 3: Installation and Setup
Threaded Fastener
CPU Socket Pin1
Heatsink
B
Rotating Wire
C
1
Rotating Wire
Peek Nut
A
Top View
3