How To Use Continuous Mode - Brother LX-1200 Owner's Manual

How to use Continuous mode

Continuous mode can reduce the wasted film between documents when laminating multiple documents.
Stop Start
POWER
ON OFF ON
Border
Cutter Off
No Border
- 18 -
(1) Set the first document on the document tray
and press the Continuous button. The green
Continuous LED will light.
(2) Press Start. The machine will start to laminate
your document. When the end of the document
is detected the laminating process pauses and
the buzzer sounds.
(3) Place the next document in the document tray.
The next document will automatically be fed
after approximately 7 seconds.