How To Use Continuous Mode - Brother LX-1200 Owner's Manual

How to use Continuous mode

Continuous mode can reduce the wasted film between documents when laminating multiple documents.
Stop Start
(1) Set the first document on the document tray
(2) Press Start. The machine will start to laminate
POWER
ON OFF ON
Border
Cutter Off
No Border
(3) Place the next document in the document tray.
- 17 -
and press the Continuous button. The green
Continuous LED will light.
your document. When the end of the
document is detected the laminating process
pauses and the buzzer sounds.
The next document will automatically be fed
after approximately 7 seconds.