About Film Rolls; Film-Supply Maintenance - Brother LX-1200 Owner's Manual

About film rolls

There are a variety of different types of film rolls that have been designed to meet your needs.
This machine supports 12.0 inch (A3), 9.0 inch (A4) or 4.8 inch (A6) width cartridges.
Use only Brother authorized film cartridges or film refills. The above mark appears on all packages of
authorized film cartridges or film refills that are compatible with the machine. Brother cannot be held
responsible for any problem arising from the use of unauthorized supplies.
Depending upon the type of film used, this machine turns a variety of documents into professional, double-
sided lamination sheets, adhesive stickers or magnetic signs. Please refer to the compatible accessory list
packaged with this machine for details.
This machine is supplied with a Double Sided Lamination Film Cartridge. For other types of film rolls, please
contact your local Brother dealer.
Note
To use a 9.0" or 4.8" cartridge with this machine, first install the cartridge adapter into the machine.
Please refer to page 30.

Film-supply maintenance

A red marker appears when the film supply is running out. Please replace the film roll as soon as you
notice this red marker. The red tape will appear approximately 39.4" (1000 mm) from the end of the roll.
If the red marker appears, replace the film immediately. Please refer to 'Replacing the film cartridge' on page
24 or 'Installing/replacing the film roll in the cartridge on page 26 to refill the film cartridge.
The starter cartridge produces about 11 US letter size sheets (landscape direction) in continuous mode. A
regular roll double-sided laminate film produces about 168 US letter size sheets (landscape direction) in
continuous mode.
Please refer to the compatible accessory list on page 2 for other supply information.
Note
A red tape will appear when the laminate film is reaching the end.
If this red tape appears, replace the film immediately. This red tape can simply be peeled off your
original document without causing damage.
Attempting to laminate another document after the red marker appears may result in a damaged and/or
cut document.
- 23 -