Brother LX-1200 Owner's Manual page 21

Note
If a new document is not placed in the feeder within 7 seconds, the machine will restart and finish the
current document.
If Start button is pressed after placing the next document in the feeder, the laminating process will restart
without waiting 7 seconds.
If Stop button is pressed before placing next document in the feeder, the Continuous mode is paused.
Press Start to restart the operation.
(4) Continue with step (3) until you are finished laminating documents. If a document is not placed in the
feeder within 7 seconds, the machine will finish laminating the document in the machine and then return
to normal mode.
Note
The Feed and Extra Border buttons will not work while the machine is in Continuous mode.
Do not change the setting of the Cutter Mode during Continuous mode.
To create an extra border with continuous mode, select the extra border mode before turning on the
continuous mode. All documents laminated will have an extra border. To turn off the extra border, turn off
continuous mode first and then turn off the extra border mode.
- 19 -