Brother Innov-is 500D Operation Manual page 64

SE-BrotherE_sgml.book Page 58 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS
■ For groups other than utility stitches
When selecting stitches in the decorative
stitch, satin stitch, cross-stitch and combined
utility stitch groups, press
making the setting.
Memo
To reset the stitch length to its standard
setting, select the same stitch again or
change the setting to the highlighted value.
means the setting cannot be adjusted.
CAUTION
● If the stitches are bunched together,
increase the stitch length. Continuing to
sew with the stitches bunched together
may result in the needle bending or
breaking.
58
after