Brother Innov-is 500D Operation Manual page 112

SE-BrotherE_sgml.book Page 106 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
Do not reduce the gap.
Pull down the buttonhole lever as far as
possible.
Buttonhole lever
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
Buttonhole lever
Bracket
Gently hold the end of the upper thread in
your left hand, and then start sewing.
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops.
106
Raise the presser foot lever, remove the fabric,
and then cut the threads.
Raise the buttonhole lever to its original
position.
Memo
If the fabric does not feed, for example,
because it is too thick, increase the stitch
length. For details, refer to "Adjusting the
stitch length" (page 57).