Brother Innov-is 500D Operation Manual page 147

SE-BrotherE_sgml.book Page 141 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Place the embroidery sheet on the inner frame.
Embroidery sheet
Inner frame
Line the mark on the fabric up with the base
line on the embroidery sheet.
Place the inner frame with the fabric on the
outer frame and stretch the fabric.
• For details, refer to page 139.
Remove the embroidery sheet.
■ Embroidery on fabrics that cannot be stretched
on an embroidery frame
When small pieces of fabric that cannot be
stretched on an embroidery frame or thin pieces
like ribbon are being embroidered, use stabilizer
material as a base to stretch on the frame.
We recommend stabilizer material for
embroidery.
Stabilizer material
Tack or spray glue
Fabric
After completing the embroidery, remove the
stabilizer material carefully.
Preparing the fabric 141