Checking Machine Operating Procedures - Brother Innov-is 500D Operation Manual

SE-BrotherE_sgml.book Page 17 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Checking machine operating
procedures
Displays simple explanations of setting upper thread /
bobbin winding / setting bobbin thread / needle
replacement / embroidery unit attachment /
embroidery frame attachment / embroidery foot
attachment / presser foot replacement on the LCD.
Turn on the sewing machine.
The LCD comes on.
Press
display panel.
The sewing machine help screen appears.
Press the item to be displayed.
Threading the upper thread
Winding the bobbin
Installing the bobbin
Needle replacement
Embroidery unit attachment
Embroidery frame attachment
embroidery foot attachment
Replacing the presser foot
The first screen describing the procedure for
the selected topic appears.
• Pressing
item selection screen.
(Sewing machine help key) on the
(Back key), returns you to the
Press (Next page key) to switch to the
next page.
If you press (Previous page key), you return
to the previous page.
Example: Upper threading
After you finish looking, press
two times.
The initial stitch screen appears again.
Note
For details on each topic, refer to the
corresponding page in this Operation
Manual.
LCD (liquid crystal display) operation 17
(Back key)