Brother Innov-is 500D Operation Manual page 143

SE-BrotherE_sgml.book Page 137 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Hold the removal lever on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
Removal lever
The embroidery unit separates from the
sewing machine.
Close the cover on the embroidery unit
connector slot on the sewing machine.
After the cover is pulled out, snap it shut.
2
Embroidery unit connector slot
Cover
Install the flap back to its original position.
1
Put the cover on the embroidery unit and store
it.
Memo
The embroidery unit can be stored with
embroidery frame (medium) or (small)
attached.
Attaching the embroidery unit 137