Brother Innov-is 500D Operation Manual page 103

SE-BrotherE_sgml.book Page 97 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Place a pattern made of thick paper on the
back of the appliqué, and then fold over the
seam allowance using an iron.
Turn the fabric over, and then baste or fuse it
onto the fabric that it will be attached to.
Basting stitching
Attach zigzag foot "J".
• For details, refer to "Replacing the presser
foot" (page 40).
Select a stitch.
• For details, refer to "Selecting stitching" (page
47).
J
Turn the balance wheel toward you, and then
begin sewing around the edge of the appliqué,
making sure that the needle drops just outside
of the appliqué.
When sewing around corners, stop the
machine with the needle in the fabric just
outside of the appliqué, raise the presser foot
lever, and then turn the fabric as needed to
change the sewing direction.
Appliqué, Patchwork and Quilt Stitching 97