Brother Innov-is 500D Operation Manual page 176

SE-BrotherE_sgml.book Page 170 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
Error Message Probable Cause
The start/stop button was pressed before the editing was completed
with the My custom stitch function.
When the embroidery unit is attached.
You pressed the Back key or the Menu key while a pattern was
selected.
The start/stop button or reverse/reinforcement stitch button was pressed
when no pattern is selected.
You tried a function that cannot be used when the embroidery unit is
attached.
You tried to select an embroidery pattern or change the layout when
the needle was down.
You tried to start sewing while the needle is lowered without the thread
cassette.
You tried to set a number of characters that will not fit within the frame.
You tried to combine more than 35 decorative stitches, satin stitches,
cross-stitches or combined utility stitches.
You tried to combine more than 25 character patterns.
Bobbin thread has run out.
Little bobbin thread remains.
You tried to select a pattern that cannot be used with this sewing
machine.
A pattern is being stored.
The time for completion of the embroidery is being calculated.
[Card] on the LCD was pressed when no card was inserted.
You tried to recall a saved card pattern without having the embroidery
card in place.
A card that cannot be used with this product has been inserted, and you
tried to select a pattern from the card.
170