Flat Fell Seam; Pintuck - Brother 882-S85 Operation Manual

Flat Fell Seam

Use for reinforcing seams and finishing edges
neatly.
a
Select and attach presser foot "J".
b
Sew the finish line, then cut half of the seam
allowance from the side on which the flat
fell seam will lie.
* When the automatic thread cutting and automatic
reinforcement stitching are preset, reinforcement
stitches will be sewn automatically at the beginning
of sewing. Press the "Reverse/Reinforcement Stitch"
button to sew a reinforcement stitch and trim the
thread automatically at the end of sewing.
a
b
a About 12 mm (approx. 1/2 inch)
b Wrong side
c
Spread the fabric out along the finish line.
b
a Finish line
b Wrong side
d
Lay both seam allowances on the side of the
shorter seam (cut seam) and iron them.
a Wrong side
a
a
e
Fold the longer seam allowance around the
shorter one, and sew the edge of the fold.
a
a Wrong side
Finished flat fell seam
a
a Surface

Pintuck

a
Mark along the folds on the wrong side of
the fabric.
a
a Wrong side
b
Turn the fabric and iron the folded parts
only.
a Surface
SEWING THE STITCHES
a
a
a
3
69