FLIR A6000 Series User Manual page 36

The Trigger Time can be set to activate on a very specific time as measured by the real time clock in
the camera.
Internal
External
Software
Time
A6000 and A8500 Series User's Manual
Trigger Sources
The trigger is generated internally to run at the frequency set by
the user (Hz).
The trigger is generated externally through the Trigger In
connector on the camera rear chassis. (3.3V LVCMOS)
The trigger is generated via a software button (Trigger button)
Camera generates an internal trigger when the internal
timestamp clock reaches a specified time.
5 –Camera Controller
36