Routine Maintenance; Replacing The Ink Cartridge - Brother FAX-1360 User Manual

Routine maintenance

Replacing the ink cartridge

Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in the cartridge.
When the machine detects an ink cartridge is
running out of ink, the machine will tell you
with a message on the LCD.
Be sure to follow the LCD prompts to replace
the ink cartridge in the correct order.
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from drying out and
damaging the print head assembly.
a
Open the ink cartridge cover.
If the ink cartridge is empty, the LCD
shows Ink Empty Black and
Replace Ink.
b
Pull the lock release lever down and
take out the ink cartridge.
74
B
B
c
Open the new ink cartridge bag, and
then take out the ink cartridge.
d
Remove the protective yellow cap (1).
1
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off
when you open the bag, the cartridge will
not be damaged.