External And Extension Phones; Connecting An External Or Extension Telephone; Using External And Extension Telephones; Using A Non-Brother Cordless External Telephone - Brother FAX-1360 User Manual

Chapter 7
External and extension
phones
Connecting an external or
extension telephone
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
Connect the telephone line cord to the jack
labeled EXT.
1 Extension telephone
2 External telephone
When you are using an external phone, the
LCD shows Ext. Tel in Use.
Using external and extension
telephones
If you answer a fax call on an extension or an
external telephone connected to the EXT.
jack of the machine, you can make your
machine take the call by using the Fax
Receive Code. When you press the Fax
Receive Code l 5 1, the machine starts to
receive the fax.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code # 5 1 to take the
call at an extension phone. (See F/T Ring
Time (Fax/Tel mode only) on page 25.)
34
If you answer a call and no one is on
the line:
You should assume that you're receiving a
7
manual fax.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
7
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 25.)
Using a non-Brother cordless
1
external telephone
If your non-Brother cordless telephone is
connected to the EXT. jack of the machine
2
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook/Hold to send the call to the cordless
handset.

Using remote codes

Fax receive code
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialing the fax receive code
7
l 5 1. Wait for the chirping sounds then
replace the handset. (See Easy
Receive on page 25.) Your caller will have to
press Start to send the fax.
7
7
7
7