Dial Tone; Phone Line Interference - Brother FAX-1360 User Manual

f
Open the Upper Jam Clear Cover (1).
Make sure that there is no jammed
paper left in the corners of the machine.
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
g
Close the Upper Jam Clear Cover.
h
Push the paper tray firmly back into the
machine. While holding the paper tray in
place, pull out the paper support until it
clicks and unfold the paper support flap.
(See the illustrations in Loading
paper on page 8.)
Troubleshooting and Routine Maintenance

Dial Tone

Setting the dial tone to Detection will shorten
the dial detect pause.
a
Press Menu, 0, 4.
b
Press a or b to choose Detection or
1
No Detection.
Press OK.
c
Press Stop/Exit.

Phone line interference

If you are having problems sending or
receiving a fax due to possible interference
on the phone line, we recommend that you
adjust the Equalization for compatibility to
reduce the modem speed for fax operations.
a
Press Menu, 2, 0, 2.
b
Press a or b to choose Basic
(or Normal).
Basic reduces the modem speed to
9,600 bps. Unless interference is a
recurring problem on your phone
line, you may prefer to use it only
when needed.
Normal sets the modem speed at
14,400 bps. (Default)
Press OK.
c
Press Stop/Exit.
Note
When you change the compatibility to
Basic, the ECM feature is not available.
B
B
73